BCLWQ - 4000 SERIES EPOXY POLYAMIDE,PRIM/TOPCT,PT B
- MSDS: BCLWQ
- Manufacturer: PRO LINE PAINT CO
- Product Name: 4000 SERIES EPOXY POLYAMIDE,PRIM/TOPCT,PT B
- National Stock Number: 8010-00N006069
Product Identification
Product ID:4000 SERIES EPOXY POLYAMIDE,PRIM/TOPCT,PT B
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006069
MSDS Number: BCLWQ
Responsible Party
SAN DIEGO, CA 92113-3613
US
Cage: 9D157
Contractor
Telephone: 619-231-2313; 619-232-8968
Cage: 9D157
Ingredients
EPICHLOROHYDRIN (SARA III)
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: 26%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 2 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
NAPHTA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 27%
OSHA PEL 100 PPM
Hazards
Effects of Overexposure:IRRITATION OF NOSE,SKIN AND THROAT,DIZZINESS
AND VOMITING MAY BE CAUSED BY INTOXICATION.
First Aid
First Aid:REMOVE PATIENT INTO FRESH AIR,WASH OVER EXPOSED AREAS ON BODY
WITH SOAP & WATER. FLUSH WITH WATER FOR 5 MINUTES,REMOVE
CONTAMINATED CLOTHING. CONSULT WITH A PHYSICIAN. EYE: FLUSH WITH
WATER 15 MIN
Fire Fighting
Flash Point:115F/46C (CC)
Lower Limits:1.45
Upper Limits:11.9
Extinguishing Media:WATERFOG,CO*2,DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONT BREATH APP,BLACKET FLAME WITH
EXTINGUISHING AGENT
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION. VENTILATE AREA.
PROVIDE RESPIRATOR AND PROTECTIVE CLOTHING TO CLEAN-UP PERSONNEL.
USE NON-SPARKING TOOLS,PICK UP SPILLED MATERIAL AND PLACE IN
CONTAINERS AND CLOSE IMMEDIAT ELY.
Handling
Handling and Storage Precautions:KEEP AWAY FROM OPEN FLAMES AND HEAT.
DO NOT STORE ABOVE 99F/37C.
Other Precautions:EQUIP STORAGE WITH FIRE EXTINGUISHER VENTILATION.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:MECHANICAL SUCTION FAN
Eye Protection:GOGGLES
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
PART B OF A TWO PART KIT.
Chemical Properties
Boiling Pt:B.P. Text:360F/182C
Vapor Pres:4
Spec Gravity:1.22
Evaporation Rate & Reference:0.20 (BUTYL ACET)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID WITH MILD ODOR
Percent Volatiles by Volume:36
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.